DeVilbiss IntelliPAP BILEVEL S w/Heated Humidifier Product Overview Back to top
The IntelliPAP Bilevel S is the perfect choice for patients who require higher pressures to maintain an open airway. With IPAP and EPAP pressures ranges of 3 to 25 cm H20, the IntelliPAP Bilevel S offers maximum adjustability and can be operated in both CPAP and Bilevel mode, but without the assistance of a backup rate.
In addition, this device offers patented Flow Rounding technology, which further enhances comfort by allowing for adjustment of transitions in and out of IPAP and EPAP. Flow Rounding provides for a more natural and comfortable waveform with independent IPAP and EPAP transition setting ranges from 0 to 5.
The DeVilbiss IntelliPAP Humidifier Chamber provides an efficient and easy to clean addition to your BiLevel system when additional moisture makes BiLevel use more comfortable.
At 26dBA, this bilevel is among the quietest available on the market today. With additional features like delay, heated humidifier, automatic altitude adjustment, auto on/off, no power brick and reminder alerts for part replacement, the IntelliPAP Bilevel S is a great value.
This IntelliPAP CPAP includes SmartCode. SmartCode is an alpha-numeric code that is shown on the display of the IntelliPAP. Much like a bar code, the character and sequence of the characters contain vital CPAP usage data in an encrypted form. Once the code is decrypted using our on-line SmartCode Report Generator, usage data—and depending on the device, efficacy data—is presented in an easy to read and understand report. Reports can be saved as a pdf and placed in the patient’s record.
The benefits of SmartCode are that the CPAP does not need to be directly connected to the computer, nor does it use memory cards. SmartCode is available in every model of IntelliPAP without additional fees or equipment/software, and provides insightful data that can be used to determine a patient's compliance and monitor the effectiveness of the prescribed therapy.
Humidifier reservoir is easy to remove and replace and includes built-in overflow protection
Free SmartCode therapy reports
Three large buttons control nearly all functions for simple operation
Auto on/off automatically starts the flow of air after breathing into the mask and stops the flow of air when mask is removed
Includes an instructional DVD
6.4 inches H x 6.5 inches W x 8.4 inches D
2.75 pounds CPAP / 4.45 pounds with Humidifier and CPAP
Auto Altitude Adjustments
Yes, up to 8500 ft
Data Storage Capacity
SmartCode is a simple and easy way to review your sleep phases without the need to purchase software. Starting the day after your first treatment, the IntelliPAP machine begins to display SmartCode messages on your machine's LCD screen. Each message is a unique encrypted code that contains the results of your CPAP sleep therapy. The IntelliPAP quickly confirms compliance using the Adherence Score. Doctors use the Adherence percentage score to determine whether a user is in compliance with CPAP LCD (Local Coverage Determination). SmartCodes report Adherence based on the best consecutive thirty days of usage. Codes can be generated for the following calendar schedule:
1 Day, 7 Days, 30 Days, 90 Days and Cumulative
Extra Air Inlet and Fine Particle Filters Included
Mask Off Alert
3-25 cm H20
0 – 45 min (in 5 minute increments)
Starting Ramp Pressure
3 cm H20 EPAP (or CPAP), increments of 0.5
The SmartLink Therapy Management system is available as an added feature; SmartLink provides a simple means of monitoring and recording CPAP usage and evaluating the effectiveness of CPAP therapy. SmartLink can be added to any IntelliPAP model, instantly increasing its capability. Stored data is transferred to a computer via an SD card for analysis by the SmartLink software package. Once the patient monitoring period is complete, then the module can be removed and placed on another IntelliPAP unit.