How To Replace Inogen One G3 Columns?

Scott Ridl posted this on Oct 17, 2018
Learn how to replace columns for the Inogen One G3 portable oxygen concentrator. This video instructs you on how to remove the columns, install new columns, prepare for reset, and to perform a sieve reset.


G3 Column Replacement Step-by-Step Guide

Tools Needed

  • Replacement Columns
  • Tool
  • User Manual

Removing the Columns

  1. Depress button on the bottom of the machine.
  2. Insert tool inside gap and push the column out.
  3. On the other side depress button on the bottom of the machine.
  4. Insert tool inside gap and push the column out.

Installing the New Columns

  1. Remove caps from the new columns.
  2. Insert new columns on each side.
  3. Make sure columns clicks in.

Preparing Machine for Sieve Reset

  1. Plug in power supply to wall.
  2. Make sure machine is powered off.
  3. Insert power supply into the machine.

Performing a Sieve Reset

  1. Press and hold light bulb button for 10 seconds.
  2. Release light bulb button, "Sieve Reset"
  3. Press and release bell button.
  4. "Sieve Reset Success"
  5. Power on unit.

Have more questions?



Categories: How To Videos