Product Features:
Intuitive, user-friendly screen
Attractive, lightweight and sleek design that weighs around 10 pounds
Pulse Dose (up to 6 LPM) and Continuous Flow (up to 2 LPM) options
Easy-to-remove rechargeable/replaceable battery with can supply oxygen for up to 7 hours on a pulse dose setting
Convenient carrying case with a detachable accessory bag and handy cart
Product Dimensions:
11.5 inches wide x 10 inches high x 6 inches long
Product Weight:
10 pounds with battery
Warranty:
Three Year Manufacturers (Respironics) Warranty
Alert / Alarm:
System technical fault, Wrong battery, Low battery, Depleted battery, High breath rate, Low oxygen purity, No breath, No flow
Battery Charging:
2 to 3 hours (approximately) from 0% charge to 100%.
Battery Duration:
Pulse Dose Setting of 2: 7 hours
Continuous Flow of 1 LPM: 4.6 hours
FAA Approved:
Yes
Filters:
Includes Internal Bacteria Filter
Flow Settings:
Continuous Flow:
0.5 to 2 liter per minute (LPM) in 0.5 increments
Pulse Dose:
1=12 ml; 1.5=18 ml
2=24 ml; 2.5=30 ml
3=36 ml; 3.5=42 ml
4=48 ml; 4.5=54 ml
5=60 ml; 5.5=66 ml
6=72 ml
Manufacturer:
Respironics
Noise Level:
Around 43 decibels at a setting of 2 (As loud as a refrigerator humming)
Operating Ranges::
41 - 104 Fahrenheit (5 - 40 Celsius)
Up - 10,000 feet (3048 m)
Oxygen Concentration:
87 to 96% at all Pulse/Continuous Settings
Power:
Output 19 VDC 7.9 A max
AC Power Input: 100 to 240 VAC, 50/60 Hz, 2.0 A
DC Power: Input 12 to 19 VDC 8.0 A max
Power Consumption:
120 watts and 150 watts during charging
Storage Ranges:
-4 - 140 Fahrenheit (-20 - 60 Celsius) unit only
How to change filter on the SimplyGo?
The Simply Go does not have a washable filter, only an internal filter that needs to be replaced. Based off the use on the machine hour wise, the internal filter should be replaced every 1-2 years.
How do I perform a hard reset on the SimplyGo?
To perform a hard reset, you will need to remove the battery from the machine and disconnect all power to the unit. Let the machine stand alone without any power for about 2 minutes. Plug the machine back into AC power (power supply for the house) WITHOUT BATTERY and turn the machine on. While the unit has been running for about 5-10 minutes place the battery into the machine WHILE RUNNING and this should eliminate the issue the machine is having. If the issue still occurs, have the customer call back and then we will follow the process of creating a case.
How do I insert and remove the battery on the SimplyGo?
When looking at the machine on the top where the handle is located, on the left side top corner you will notice a rectangle cut out. This is where the battery is located, when placing the battery inside the machine make sure you set the battery in gently. If you drop or slam the battery into the machine the tabs or pc boards on the battery or inside the machine can get damaged or break. When removing the battery, place your finger tips on the top left corner, then just slightly on the backside of the machine where you will notice an indent in the battery. Lift up on the battery and remove towards you, make sure you have control of the battery so it does not drop back into the machine or slip out of your hand.
How long does the battery last at all settings on the SimplyGo?
The battery duration FULLY CHARGED for Pulse and also Continuous
Pulse
Setting 1: 3.7 hours
Setting 2: 3.5 hours
Setting 3: 3.1 hours
Setting 4: 2.7 hours
Setting 5: 2.3 hours
Setting 6: 1.9 hours
Continuous
Setting 1: 2.3 hours
Setting 2: 0.7 hours